Geesol energy products
On this page, you will find a list of products offered by Geesol energy. These include solar water heaters and solar photovoltaic systems.
Solar Photo Voltaic Systems – Geesol Energy
Solar Back up Systems
At Geesol Energy, we help our clients develop ongrid, off grid & hybrid energy storage systems which are fully digitalized energy storage portfolio with high efficiencies and with factory-built, pre-tested solutions that achieve extensive quality control for the highest level of safety and client satisfaction. Our solar energy storage solutions can be deployed straight to the customer site, for faster installation, shorter project execution time, and higher savings for customers. Its revolutionary state of art design achieves market leading energy density, easier installation, enabling owners to quickly utilize the benefits of reliable & clean power at a low cost.
Power: 390W-410W
Solar Cell: Monocrystalline half cells
Power Tolerance: 0~5w
Weight: 22.7kg
Dimensions: 2015× 996× 35/40mm
Warranty: 10years
Delivery Time: 10-15 days
| Description of Specification | Configuration | Units | Model |
| NES144-6-410M | |||
| General Data | |||
| Maximum Power | Pm(W) | Watts | 410W |
| Watt Tolerance | – | Watts | 0-5 |
| Storage & Operating Temperature | – | Deg .C | -45~85 |
| Voltage & Ampereage | |||
| Maximum System Voltage | – | Volts | 1000V/1500V DC |
| Maximum Operating Voltage | Vmp | Volts | 41.88 |
| Maximum Operating Current | Imp | Amps | 9.79 |
| Open Circuit Voltage | Voc | Volts | 50.12 |
| Short Circuit Current | Isc | Amps | 10.45 |
| Solar Cell | |||
| Cell Type | – | – | Monocrystalline cells |
| Number of Cells | In Series | – | 144(12*6*2) |
| Warranty | |||
| Manufacturing | – | Years | 10 |
| Dimensions & Weight | |||
| Dimensions: Length×Width×Height | – | mm | 2015× 996× 35/40 |
| Weight | – | kg | 22.7 |
LOW-PRESSURE SOLAR WATER HEATING
It is a non-pressurized solar water heater.
Using a thermosiphon system, depending on the different densities between solar hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while cold water flows down. The water in the storage tank will be heated from this natural circulation.
For other information please see below.
Characteristic
1, With intelligent controller.
2, Easy to install for flat roof and pitched roof, auxiliary heating by an electrical heater.
3, High-pressure polyurethane foaming with a thickness 55mm.
4, Stable and reliable performance, well wind resistance.
5, SUS304-2B inner tank, silicon seals.
6, SUS304-2B/BA outer tank, against rust and corrosion.
7, Eco and economical improve the environment and save your fuel cost.
Working Principle
This model operates to feed water automatically using a thermosiphon system, depending on the different densities between solar hot water and cold water, a water flowing cycle is created in the tubes. Hot water flows automatically upwards while cold water flows down. The water in the storage tank will be heated from this natural circulation.
Characteristics
1, With intelligent controller.
2, Easy to install for flat roof and pitched roof, auxiliary heating by an electrical heater.
3, High-pressure polyurethane foaming with a thickness of 55mm.
4, Stable and reliable performance, well wind resistance.
5, SUS304-2B inner tank, silicon seals.
6, SUS304-2B/BA outer tank, against rust and corrosion.
7, Eco and economical improve the environment and save your fuel cost.
Pressurized Solar Water Heaters
Working Principle
Integrated pressurized type is an innovative model for solar hot water, which adopts heat pipe technology, and combines a heat pipe solar collector with a pressurized tank to form a compact model.
The vacuum tubes absorb and convert solar energy into thermal energy, and transfer it to the central heat pipe via the aluminum fin. The heat pipes have a tiny amount of purified water sealed inside at depressurized conditions. When heated, the medium inside the heat pipes vaporizes at low temperatures, the vapor rises to the condenser, and heat energy is conducted to water(inside the tank). When the vapor is cooled down, and becomes condensate, and falls to the bottom of the heat pipe. By continuous circulation in this way, heat is carried from outside to the water inside the tank.
CHARACTERISTIC OF PRESSURISED SOLAR WATER HEATERS
Integrated pressurized solar water heaters belong to the pressurized solar water heaters.
It has three main features:
A: The water will not flow into the vacuum tubes directly, the system will still work even if the tube is broken.
B: Anti-freezing, even in extremely cold areas.
C: Adopts metal-copper(heat pipe)
Other characteristics and additional information,
Characteristic
1,The water will not flow into the tubes directly, the system will still work even if the tube is broken.
2,With intelligent controller.
3,Anti-freezing, all-year-round service even in extremely cold area.
4,Adopting metal copper(heat pipe).
5,Directly connected with city water without a circulation pump.
6,Working pressure(0.6MPak)
Available Solar Water Heaters Options
High Pressure
Low Pressure
Reach out to us and get the best solar water heaters services.